STORAGE TANKS
 
BENZOL TOWER OF SEPERATION
 
JET PULSE BAG FILTER
 
SANTIRFUJ FANS
 
PENSTOCK and ADDITIONAL EQUIPMENTS
 
ELBOW MANUFACTURING
 
STEEL CONSTRUCTION
 
HEATING EQUIPMENT
PRESSURE VESSELS
CEMENT SILO
 
   HEAT EXHANGERS

Technical Information

Description: Heat Exchanger

Type: U-tube, Horizontal & Vertical, Leg

Operating Pressure: Variable

Test Pressure: Variable

Material: Copper Pipes, Steel Pipes, Stainless Steel Pipe

Insulation: 50mm mineral wool coated galvanized sheet

Warranty: 2 years

 

Basic Features of Tube Heat Exchangers:

 

• Straight or hairpin (U), a coiled tubing.that transfer heat
• In general made of pipe and some specific cases or for large diameter made of twisted sheet metal body.
• The tubes are detected mirror or mirrors.
• Directing the flow inside the casing pipe and pipe support which may be outside the curtains to change the direction.
• Nozzles that providing Body-side fluid inlet and outlet
• Providing input and output of the head and the head tube side fluid nozzles.
• Mirror and the flanges of the detection heads.
• installation of heat exchanger to provide any bearing on a pedestal feet.
• Heat exchanger to prevent heat loss from the outer surfaces of the insulation.

Operating conditions, permitted pressure drop, the size of the operating pressure of fluids, taking into account a variety of factors, such as black, galvanized, stainless steel and copper tube material is applied in several body and tube-side flow arrangements. Manufacturing is appropriate to TSE 1996

 

 
     
Deser Chemical Stainless Coil Manufacturing


 
     

45 m² Steel Tubular Heat Exchanger Manufacturing Plumbing MTG (Hacettepe University)

Ibrahim Gunay, 45 m² Steel Tubular Heat Exchanger Manufacturing (Hacettepe University)


PROCESS EXCHANGERS

Description: Heat Exchanger

Type: U-tube, Horizontal & Vertical, Leg

Operating Pressure: Variable

Test Pressure: Variable

Material: Copper Pipes, Steel Pipes, Stainless Steel Pipe

Insulation: 50mm mineral wool coated galvanized sheet

Warranty: 2 years

 

    

 
     
ITC Company Custom manufacturing Process Heat Exchangers



FUEL OIL EXCHANGERS

• Tank Suction Heaters

• Bottom Tank Heaters

• Heating Fuel Filtration Pumping Stations

Fuel oil heat must be minimum 40 º C temperature for absorbing from storage tank to system. For this purpose, as described in the storage tank into the pipe coils are laid as floor heating, the output of the fuel tank is manufactured and assembled in the intake heater. Absorbed by the fuel pump suction tank heater is heated, passed line heater and then the temperature was increased further pumped burner. Temperature of the heated fuel line heater, the burner according to the type and varies between 60 to 130 º C.


 

METALTEK Metallurgical Industry - ANKARA

Project: scrap tires Petroleum Production Exchangers - Condensation Tank and Equipment

Photos

Highslide JS      Highslide JS      Highslide JS

  

Copper Pipe                                      Stainless Steel

  

  

  

Implementation of Special Process Type Heat Exchanger

      Tekstil Endüstrisi

      Kağıt Endüstrisi

      Kimya Endüstrisi

      Lastik, plastik Endüstrisi

      Sabun ve deterjan Endüstrisi

      Petrol Sanayi

      Gıda Sanayi

  

ALKIM Inc. - 125 m2 Tensile Steel Tube Heat Exchanger Manufacturing - KONYA

KONYA HIGHWAYS - 3 x 100 m2 Suction Heater - KONYA

YÜKSELPEN CONSTRUCTION - 2 x 20 m2 Copper Tube Heat Exchanger - ANKARA

İBRAHİM GÜNAY - 45 m² Steel Pipe U-type serpentine Production –
Hacettepe University Project - ANKARA

Novatek - Copper Tube Serpentine Production - BOLU

AŞKALE CEMENT - Copper Tube Serpentine Manufacturing - ERZURUM

ITC TURKEY - Special Process Heat Exchanger Manufacturing –
Solid Waste Treatment Plant Project-ANKARA

BMH ENGINEERING-170 000 Kcal / h 60 Atu Test Heat Exchanger Manufacturing - ANKARA

MESA Koru - Heat Exchangers Production and Exchange - ANKARA

FERHAT DEMİRCİ- Copper Tube Heat Exchanger Manufacturing-
Anadolu University -Heat Center - Eskisehir

Deser CHEMISTRY - Stainless Tubular Heat Exchanger Manufacturing - BURSA

AŞKALE CEMENT - 170 000 Kcal / h Heat Exchanger 40 Atu - ERZURUM

BMH ENGINEERING-200 000 Kcal / h 60 Atu Test Heat Exchanger Manufacturing - ANKARA

İŞBİR SPONGE-300 000 Kcal Steel Tubular Heat Exchanger Manufacturing - ANKARA

ULUSOY ENGINEERING - 30 m² Vertical Type Heat Exchanger Manufacturing

KOMFOR SYSTEMS-Stainless Steel Pipe Serpentine Manufacturing - Aydin

TUAL ENGINEERING - 6 m² Copper Pipe Heat Exchanger Manufacturing - ANKARA

ALKAN CONSTRUCTION - 30 m² Suction Heater Manufacturing - ISTANBUL

NOVATEK IND.- Steel & Copper Tube Coil Manufacturing Custom Manufacturing - ERZURUM

METALTEK Metallurgical Industry - ANKARA-
Project: scrap tires Petroleum Production Exchangers - Condensation Tank and Equipment

 

Our ISO 9001:2000 Quality Certificate, TSE 1996 possessing and manufacturing is available.